THREE 60 SINGLE-USE ASEPTIC SAMPLING SYSTEM
TAKING A SAMPLE MADE TO BE SIMPLE
The simple design behind the three60 Sampling System allows you to take a representative sample of your product with minimal effort. For a completely sterile transfer, use a CIP or SIP process to prepare your tank. The pre-irradiated bags and assemblies will ensure a sterile fluid path while the quick-turn valve and Pinch and Cut Disconnections maintain sterile transfer and removal.
SINGLE-USE SOLUTIONS
Single-use systems are providing improved sterility and reduced cleaning requirements over traditional sampling systems across all applications in the Bio-Pharmaceutical Industry. The three60 Single-Use System brings the same advantages to sampling resulting in a quicker solution and a safer process.
EFFICIENT
With the three60 system, there are no parts to be assembled, disassembled or cleaned and unlike other single-use sampling systems, no additional tools are needed. The entire set can be easily applied to your fluid holding vessel or transfer line and four samples can be removed in only a few minutes. three60 is compatible to your vessel with either a NA port or a 1½” sanitary connector; no expensive hardware is needed. Each three60 package contains a valve and four assemblies with Pinch and Cut Disconnections.
VALVE MECHANICS
The three60 valve only turns in one direction and will only turn once to an open position then again to a closed position for each line. There is no risk of cross contamination between lines because of the single turn direction of the valve barrel and the individual fluid paths for each sample assembly. Additionally, the valve closes ensuring that no fluid “hold-up” can be flushed into the next sample during the CIP / SIP process.
.png)
Literature
Three60 Single Use Sampling System Brochure
Three60 Single Use Sampling System Cut Sheet
